Publications de Nathalie Bozzolo

Articles avec comité de lecture (69)

2020

Bozzolo N., Bernacki M., "Viewpoint on the formation and evolution of annealing twins during thermomechanical processing of FCC metals and alloys", Metallurgical and Materials Transactions A, online 05 May 2020 (2020)

Seret A., Moussa C., Bernacki M., Bozzolo N., "A mean field model of agglomeration as an extension to existing precipitation models", Acta Materialia, 192 (2020) p.40-51

Semiatin S.L., Levkulich N.C., Heck C.A., Mann A.E., Bozzolo N., Pilchak A.L., Tiley J.S., "Transient plastic flow and phase dissolution during Hot Compression of alpha/beta titanium alloys", Metallurgical and Materials Transactions A, 51 (2020) p.2291-2305

Charpagne M.-A., Polonsky A., Echlin M.P., Jacomet S., De Jaeger J., De Graef M., Bozzolo N., Pollock T., "Growth accidents induced by primary gamma' precipitates in a polycrystalline Nickel-based superalloy", Scripta Materialia, 186:109-113 (2020)

Fausty J., Bozzolo N., Bernacki M., "A 2D Level-Set Finite Element grain coarsening study with heterogeneous grain boundary energies", Applied Mathematical Modelling, 78 (2020) p.505-518

2019

Schlosser F., Signorelli J., Leonard M., Roatta A., Bozzolo N., "Influence of the strain path changes on the formability of a zinc sheet", Journal of Materials Processing Technology, 271 (2019) p.101-110

Nicolay A., Fiorucci G., Franchet J.M., Cormier J., Bozzolo N., "Influence of strain rate on subsolvus dynamic and post-dynamic recrystallization kinetics of Inconel 718", Acta Materialia, 174 (2019) p.406-417

Seret A., Moussa C., Bernacki M., Signorelli J., Bozzolo N., "Estimation of geometrically necessary dislocation density from filtered EBSD data by a local linear adaptation of smoothing splines (LLASS)", Journal of Applied Crystallography, 52 (2019) p.548-563

Nicolay A., Franchet J.M., Cormier J., Mansour H., De Graef M., Seret A., Bozzolo N., "Discrimination of dynamically and post-dynamically recrystallized grains based on EBSD data: application to Inconel 718", Journal of Microscopy, 273:Issue 2 (2019) p.135-147

Fressengeas C., Beausir B., Kerisit C., Helbert A.L., Baudin Th., Mathon M.H., Besnard R., Bozzolo N., "On the evaluation of dislocation densities in pure tantalum from EBSD orientation data", Matériaux & Techniques, 106 (2019) p. paper 604

Chatain D., Courtois B., Ozerov I., Bozzolo N., Kelly M., Rohrer G.S., Wynblatt P., "Growth and orientation relationships of Ni and Cu films annealed on slightly miscut (1-102) r-sapphire substrates", Journal of Crystal Growth, 508 (2019) p.24-33

Polychronopoulou D., Bozzolo N., Pino Muñoz D., Bruchon J., Shakoor M., Millet Y., Dumont C., Freiherr Von Thungen I., Besnard R., Bernacki M., "Introduction to the level-set full field modeling of laths spheroidization phenomenon in α/β titanium alloys", International Journal of Material Forming, 12:2 (2019) p.173-183

2018

Fausty J., Bozzolo N., Pino Muñoz D., Bernacki M., "A novel level-set finite element formulation for grain growth with heterogeneous grain boundary energies", Materials and Design, 160 (2018) p.578-590

Vernier S., Franchet J.M., Dumont C., Bozzolo N., "A mechanism leading to γ' precipitates with {111} facets and unusual orientation relationships to the matrix in γ/γ' nickel-based superalloys ", Metallurgical and Materials Transactions A, 49A (2018) p.4308-4323

Hamadi S., Hamon F., Delautre J., Cormier J., Villechaise P., Utada S., Kontis P., Bozzolo N., "Consequences of a room temperature plastic deformation during processing on the durability of a Ni-based SX superalloy", Metallurgical and Materials Transactions A, 49A (2018) p.4246-4261

Seret A., Moussa C., Bernacki M., Bozzolo N., "On the coupling between recrystallization and precipitation following hot deformation in a γ- γ’ Nickel-Based superalloy", Metallurgical and Materials Transactions A, 49A (2018) p.4199-4213

Vernier S., Franchet J.M., Dumont C., Vennéguès P., Bozzolo N., "γ′ precipitates with a twin orientation relationship to their hosting grain in a γ-γ′ nickel-based superalloy", Scripta Materialia, 153 (2018) p.10-13

Maire L., Fausty J., Bernacki M., Bozzolo N., De Micheli P., Moussa C., "A new topological approach for the mean field modeling of dynamic recrystallization", Materials and Design, 146 (2018) p.194-207

Ilin D., Bozzolo N., Toulorge T., Bernacki M., "Full field modeling of recrystallization: effect of intragranular strain gradients on grain boundary shape and kinetics", Computational Materials Science, 150 (2018) p.149-161

Vernier S., Franchet J.M., Lesne M., Douillard T., Silvent J., Langlois C., Bozzolo N., "iCHORD-SI combination as an alternative to EDS-EBSD coupling for the characterization of γ-γ’ Nickel-base superalloy microstructures", Materials Characterization, 142 (2018) p.492-503

Charpagne M.-A., Franchet J.M., Bozzolo N., "Overgrown grains appearing during sub-solvus heat treatment in a polycrystalline γ-γ’ Nickel-based superalloy", Materials and Design, 144 (2018) p.353-360

2017

Moussa C., Bernacki M., Besnard R., Bozzolo N., "Statistical analysis of dislocations and dislocation boundaries from EBSD data", Ultramicroscopy, 179 (2017) p.63-72

Zouari M., Logé R.E., Bozzolo N., "In-situ characterization of Inconel 718 post-dynamic recrystallization within a scanning electron microscope ", Metals (open access journal), 7:476 (2017)

Maire L., Scholtes B., Moussa C., Bozzolo N., Pino Muñoz D., Settefrati A., Bernacki M., "Modeling of dynamic and post-dynamic recrystallization by coupling a full field approach to phenomenological laws", Materials and Design, 133 (2017) p.498-519

Rudiger C., Favaro M., Valero Vidal C., Calvillo L., Bozzolo N., Jacomet S., Hein J., Gregoratti L., Agnoli S., Granozzi G., Kunze-Liebhauser J., "Substrate Grain-Dependent Chemistry of Carburized Planar Anodic TiO2 on Polycrystalline Ti", ACS Omega, 2:2 (2017) p.631-640

Signorelli J., Roatta A., De Vincentis N., Schwindt C., Avalos M., Bolmaro R., Bozzolo N., "Electron backscatter diffraction study of orientation gradients at the grain boundaries of a polycrystalline steel sheet deformed along different loading paths", Journal of Applied Crystallography, 50 (2017) p.1179-1191

2016

Maire L., Scholtes B., Moussa C., Bozzolo N., Pino Muñoz D., Bernacki M., "Improvement of 3-D mean field models for capillarity driven grain growth based on full field simulations", Journal of Materials Science, 51 (2016) p.10970-10981

Scholtes B., Boulais-Sinou R., Settefrati A., Pino Muñoz D., Poitrault I., Montouchet A., Bozzolo N., Bernacki M., "3D level set modeling of static recrystallization considering stored energy fields", Computational Materials Science, 122 (2016) p.57-71

Charpagne M.-A., Vennéguès P., Billot T., Franchet J.M., Bozzolo N., "Evidence of multimicrometric coherent γ’ precipitates in a hot-forged γ-γ’ nickel-based superalloy", Journal of Microscopy, 263:1 (2016) p.106-112

Charpagne M.-A., Billot T., Franchet J.M., Bozzolo N., "Heteroepitaxial recrystallization : A new mechanism discovered in a polycrystalline γ-γ′ nickel based superalloy", Journal of Alloys and Compounds, 688 (2016) p.685-694

Zouari M., Bozzolo N., Logé R.E., "Mean field modelling of dynamic and post-dynamic recrystallization during hot deformation of Inconel 718 in the absence of δ phase particles", Materials Science and Engineering A, 655 (2016) p.408-424

Rudiger C., Favaro M., Valero Vidal C., Calvillo L., Bozzolo N., Jacomet S., Gregoratti L., Amati M., Hejny C., Agnoli S., Granozzi G., Kunze-Liebhauser J., " Fabrication of Ti substrate grain dependent C/TiO2 composites through carbothermal treatment of anodic TiO2", Physical Chemistry Chemical Physics, 18 (2016) p.9220-9231

Scholtes B., Ilin D., Settefrati A., Bozzolo N., Agnoli A., Bernacki M., "Full field modeling in a level set framework of Zener pinning phenomenon - discussion of classical limit mean grain size equation", Superalloys 2016 : 13th International Symposium on Superalloys (2016) p.497-503

Charpagne M.-A., Billot T., Franchet J.M., Bozzolo N., "Heteroepitaxial recrystallization observed in RENE65 and UDIMET 720: A new recrystallization mechanism possibly occurring in all low lattice mismatch γ-γ’ Nickel based superalloys? ", Superalloys 2016 : 13th International Symposium on Superalloys (2016) p.417-426

Jin Y., Bernacki M., Agnoli A., Lin B., Rohrer G.S., Rollett A.D., Bozzolo N., "Evolution of the annealing twin density during delta-supersolvus grain growth in the nickel-based superalloy Inconel 718 ", Metals (open access journal), 6:1 (2016) p.5

2015

Lin B., Jin Y., Hefferan C., Fai Li S., Lind J., Suter R., Bernacki M., Bozzolo N., Rollett A.D., Rohrer G.S., "Observation of annealing twin nucleation at triple lines in nickel during grain growth", Acta Materialia, 99 (2015) p.63-68

Scholtes B., Shakoor M., Settefrati A., Bouchard P.O., Bozzolo N., Bernacki M., "New finite element developments for the full field modeling of microstructural evolutions using the Level-Set method", Computational Materials Science, 109 (2015) p.388-398

Agnoli A., Bernacki M., Logé R.E., Franchet J.M., Laigo J., Bozzolo N., "Selective growth of low stored energy grains during δ sub-solvus annealing in the Inconel 718 nickel base superalloy", Metallurgical and Materials Transactions A, 46A (2015) p.4405-4421

Jin Y., Lin B., Rollett A.D., Rohrer G.S., Bernacki M., Bozzolo N., "Thermomechanical factors influencing annealing twin development in nickel during recrystallization", Journal of Materials Science, 50 (2015) p.5191-5203

Jin Y., Bozzolo N., Rollett A.D., Bernacki M., "2D Finite element modeling of anisotropic grain growth in polycrystalline materials: level-set versus multi-phase-field method", Computational Materials Science, 104 (2015) p.108-123

2014

Calvillo L., Fittipaldi D., Rudiger C., Agnoli S., Favaro M., Valero Vidal C., Di Valentin C., Vittadini A., Bozzolo N., Jacomet S., Gregoratti L., Kunze-Liebhauser J., Pacchioni G., Granozzi G., "The carbothermal transformation of Ti02 into TiOxCy in UHV : Tracking intrinsic chemical stabilities", Journal of Physical Chemistry C, 118 (2014) p.22601-22610

Agnoli A., Bozzolo N., Logé R.E., Franchet J.M., Laigo J., Bernacki M., "Development of a level set methodology to simulate grain growth in the presence of real secondary phase particles and stored energy – Application to a nickel-base superalloy", Computational Materials Science, 89 (2014) p.233-241

Jin Y., Lin B., Bernacki M., Rohrer G.S., Rollett A.D., Bozzolo N., "Annealing twin development during recrystallization and grain growth in pure nickel", Materials Science and Engineering A, 597 (2014) p.295-303

Saby M., Massoni E., Bozzolo N., "A metallurgical approach to individually assess the rheology of alpha and beta phases of Ti–6Al–4V in the two-phase domain", Materials Characterization, 89 (2014) p.88-92

2013

Kerisit C., Logé R.E., Jacomet S., Llorca V., Bozzolo N., "EBSD coupled to SEM in situ annealing for assessing recrystallisation and grain growth mechanisms in pure tantalum", Journal of Microscopy, 250:3 (2013) p.189-199

2012

Bozzolo N., Souaï N., Logé R.E., "Evolution of microstructure and twin density during thermomechanical processing in a gamma-gamma’ nickel-based superalloy", Acta Materialia, 60 (2012) p.5056–5066

Bozzolo N., Jacomet S., Logé R.E., "Fast in-situ annealing stage coupled with EBSD: A suitable tool to observe quick recrystallization mechanisms", Materials Characterization, 70 (2012) p.28-32

2011

Bayona-Carrillo N., Bozzolo N., Fundenberger J.J., Thomas B., Camelin P., Lenarduzzi E., Wagner F., "Effect of Recrystallization on Tensile Behavior Texture and Anisotropy of Ti-3Al-2.5V Cold Pilgered Tubes", Advanced Engineering Materials, 13:5 (2011) p.383-387

Quelennec X., Bozzolo N., Jonas J.J., Logé R.E., "A New Approach to Modeling the Flow Curve of Hot Deformed Austenite", ISIJ International, 51:6 (2011) p.945-950

2010

Molodov D.A., Bozzolo N., "Observations on the effect of a magnetic field on the annealing texture and microstructure evolution in zirconium", Acta Materialia, 58 (2010) p.3568-3581

Bozzolo N., Chan L., Rollett A.D., "Misorientations induced by Deformation Twinning in Titanium", Journal of Applied Crystallography, 43 (2010) p.596-602

Arl D., Dalmasso S., Bozzolo N., Zhang Y., Gaumet J.J., Laurenti J.P., "Physical and chemical analyses on single source precursor growth CdSe semiconductor nanomaterials", Materials Chemistry and Physics, 124 (2010) p.129–133

Souaï N., Bozzolo N., Nazé L., Chastel Y., Logé R.E., "About the possibility of grain boundary engineering via hot-working in a nickel-base superalloy", Scripta Materialia, 62:11 (2010) p.851–854

2009

Barbier D., Gey N., Allain S., Bozzolo N., Humbert M., "Analysis of the tensile behavior of a TWIP steel based on the texture and microstructure evolutions", Materials Science and Engineering A, 500 (2009) p.196-206

Gerspach F., Bozzolo N., Wagner F., "About texture stability during primary recrystallization of cold-rolled low alloyed zirconium", Scripta Materialia, 60 (2009) p.203-206

Barbier D., Gey N., Bozzolo N., Allain S., Humbert M., "EBSD analysis of the twinning microstructure in fine-grained TWIP steels - Influence on the work hardening", Journal of Microscopy - Oxford, 235 (2009) p.67-78

2007

Ji G., Grosdidier T., Bozzolo N., Launois S., "The mechanisms of microstructure formation in a nanostructured oxide dispersion strengthened FeAl alloy obtained by spark plasma sintering", Intermetallics, 15 (2007) p.108-118

Bozzolo N., Dewobroto N., Wenk H., Wagner F., "Microstructure and microtexture of cold-rolled commercially-pure titanium", Journal of Materials Science, 42 (2007) p.2405-2416

Bozzolo N., Gerspach F., Sawina G., Wagner F., "Accuracy of orientation distribution function determination based on EBSD data – Case of a recrystallized low alloyed Zr sheet", Journal of Microscopy, 227 (2007) p.275-283

2006

Grosdidier T., Ji G., Bozzolo N., "Hardness, thermal stability and yttrium distribution in nanostructured deposits obtained by thermal spraying from milled – Y2O3 reinforced – or atomized FeAl powders", Intermetallics, 14 (2006) p.715-721

Guise A., Bozzolo N., Barrat S., Bauer-Grosse E., "Crystal orientation distribution in HOD films investigated by SEM and TEM", Diamond and Related Materials, 15 (2006) p.531-535

Dewobroto N., Bozzolo N., Barberis P., Wagner F., "On the mechanisms governing the texture and microstructure evolution during static recrystallization and grain growth of low alloyed zirconium sheets (Zr702)", International Journal of Materials Research, 97 (2006) p.826-833

2005

Bozzolo N., Dewobroto N., Grosdidier T., Wagner F., "Texture evolution during grain growth in recrystallized commercially pure titanium", Materials Science and Engineering A, 397 (2005) p.346-355

Zhang Y., Zhao X., Bozzolo N., He C., Zuo L., Esling C., "Low temperature tempering of a medium carbon steel in high magnetic field", ISIJ International, 45:6 (2005) p.913-917

Molodov D.A., Konijnenberg P.J., Bozzolo N., Sheikh-Ali A.D., "Magnetically Affected Texture and Grain Structure Development in Titanium", Materials Letters, 26 (2005) p.3209-3213

2003

Wagner F., Bolle B., Bozzolo N., "Texture heterogeneities and their determination", The Physics of Metals and Metallography, 96 (2003) p.S75-S90

2002

Wagner F., Bozzolo N., Van Landuyt O., Grosdidier T., "Evolution of recrystallisation texture and microstructure in low alloyed titanium sheets", Acta Materialia, 50 (2002) p.1245-1259

1997

Bozzolo N., Barrat S., Dieguez I., Bauer-Grosse E., "Crystalline quality of highly oriented diamond films grown on <100> silicon studied by conventional TEM", Diamond and Related Materials, 6 (1997) p.41-47

1996

Bozzolo N., Barrat S., Dieguez I., Bauer-Grosse E., "Spatial distribution of stacking faults and microtwins in isolated crystals and textured diamond films", Diamond and Related Materials, 5 (1996) p.1532-1535

Actes de conférence (29)

2019

De Micheli P., Maire L., Cardinaux D., Moussa C., Bozzolo N., Bernacki M., "DIGIMU®: 2D and 3D Full Field Recrystallization Simulations and Optimization of Multi-Pass Processes", Proceedings of 22th International Conference on Material Forming (ESAFORM 2019):6 pages (2019)

2018

Settefrati A., De Micheli P., Maire L., Scholtes B., Bozzolo N., Moussa C., Perchat E., Bernacki M., "Prediction of the grain size evolution during thermal treatments at the mesoscopic scale: a numerical framework and industrial examples", Matériaux & Techniques, 106:105 (2018)

2017

Maire L., Scholtes B., Moussa C., Bozzolo N., Settefrati A., Poitrault I., Karch A., Bernacki M., "3D Full field modelling of recrystallization in a finite element framework – application to 304L", CSMA 2017, 13ème Colloque National en Calcul des Structures (2017)

2016

Charpagne M.-A., Billot T., Franchet J.M., Bozzolo N., "Heteroepitaxial recrystallization, a new recrystallization mechanism in sub-solvus forged γ-γ' Nickel-based superalloys with low lattice mismatch", Recrystallization and Grain Growth VI, Proceedings (2016) p.259-264

Polychronopoulou D., Bozzolo N., Pino Muñoz D., Bruchon J., Shakoor M., Millet Y., Dumont C., Freiherr Von Thungen I., Besnard R., Bernacki M., "Introduction to the level-set full field modeling of lathe spheroidization phenomenon in α/β titanium alloys", MATEC Web Of Conference, 80:02003 (2016)

Scholtes B., Settefrati A., Bozzolo N., Perchat E., Chenot J.L., Bernacki M., "Large scale FE simulations of recrystallization and grain growth thanks to a level set approach, illustrations in context of industrial forming processes", NUMIFORM 2016, 12th International Conference on Numerical Methods in Industrial Forming Processes (2016)

2015

Moussa C., Bernacki M., Besnard R., Bozzolo N., "About quantitative EBSD analysis of deformation and recovery substructures in pure Tantalum", IOP Conference Series Materials Science and Engineering, 89 (2015) p.012038

Scholtes B., Shakoor M., Bozzolo N., Bouchard P.O., Bernacki M., "Advances in Level-Set modeling of recrystallization at the polycrystal scale - Development of the Digi-μ software", Key Engineering Materials, 651-653 (2015) p.617-623

2014

Bernacki M., Bozzolo N., Logé R.E., Scholtes B., Jin Y., Agnoli A., Fabiano A.L., Hitti K., "Advances in level set modeling of recrystallization at the mesoscopic scale", OPTIMoM 2014 (2014)

Zouari M., Logé R.E., Beltran O., Rousselle S., Bozzolo N., "Multipass forging of Inconel 718 in the delta-Supersolvus domain: assessing and modeling microstructure evolution", PROCEEDINGS EUROSUPERALLOYS 2014 MATEC WEB OF CONFERENCES, 14 (2014) p.12001-6

2013

Bozzolo N., Agnoli A., Souaï N., Bernacki M., Logé R.E., "Strain assisted abnormal grain growth in nickel base superalloys", Materials Science Forum, 753 (2013) p.321-324

Jin Y., Bernacki M., Rohrer G.S., Lin B., Rollett A.D., Bozzolo N., "Formation of annealing twins during recrystallization and grain growth in 304L austenitic stainless steel", Materials Science Forum, 753 (2013) p.113-116

Lin B., Rohrer G.S., Rollett A.D., Jin Y., Bozzolo N., Bernacki M., "Evolution of Microstructure in pure Nickel during Processing for Grain Boundary Engineering ", Materials Science Forum, 753 (2013) p.97-100

2012

Bozzolo N., Jacomet S., Houillon M., Gaudout B., Logé R.E., "EBSD coupled to SEM in-situ annealing as a tool to identify recrystallization mechanisms - application to Zr and Ta alloys", Materials Science Forum, 715-716 (2012) p.486-491

Molodov D.A., Bozzolo N., "Magnetically Affected Texture and Microstructure Evolution during Grain Growth in Zirconium", Materials Science Forum, 715-716 (2012) p.946-951

Kerisit C., Bozzolo N., Sandim H.R.Z., Geslin W., Llorca V., Logé R.E., "Effect of grain orientation on the development of dislocation substructures during cold-deformation of pure Tantalum. Link with static recrystallization and recovery", PROCEEDINGS OF THE 18TH INTERNATIONAL SYMPOSIUM ON PLASTICITY AND ITS CURRENT APPLICATIONS (PLASTICITY 2012) (2012) p.109-111

Agnoli A., Bernacki M., Logé R.E., Franchet J.M., Laigo J., Bozzolo N., "Understanding and modeling of grain boundary pinning in Inconel718", Superalloys 2012 : 12th International Symposium on Superalloys (2012) p.73-82

2011

Bayona-Carrillo N., Bozzolo N., Schuman C., Fundenberger J.J., Wagner F., "On the Relation between Microstructure Texture and Tensile Deformation Behavior of Ti3Al2.5V Alloy at Room Temperature", Proceedings of Titanium 2011 (2011)

2010

Souaï N., Logé R.E., Chastel Y., Bozzolo N., Maurel V., Nazé L., "Effect of Thermomechanical Processes on sigma3 Grain Boundary Distribution in a Nickel Base Superalloy", Materials Science Forum, 638-642 (2010) p.2333-2338

2007

Gerspach F., Bozzolo N., Wagner F., "Recrystallisation behavior of cold-rolled Zr702 : influence of rolling direction and thickness reduction", Materials Science Forum, 550 (2007) p.459-464

Bozzolo N., Gerspach F., Sawina G., Sztwiertnia K., Rollett A.D., Wagner F., "Grain boundary character distribution during grain growth in a Zr alloy", Materials Science Forum, 558-559 (2007) p.863-868

Sawina G., Gerspach F., Bozzolo N., Sztwiertnia K., Wagner F., "Modeling the evolution of orientation distribution functions during grain growth of some Ti and Zr alloys", Materials Science Forum, 558-559 (2007) p.1163-1168

2006

Sawina G., Bozzolo N., Sztwiertnia K., Wagner F., "Preparation of data from EBSD measurements for cellular automaton modeling of annealing phenomena in hexagonal materials", Archives of Metallurgy and Materials, 51:1 (2006) p.63-67

2005

Dewobroto N., Bozzolo N., Wagner F., "Influence of deformation substructures on the early mechanisms of recrystallization in cold-rolled titanium and zirconium", Materials Science Forum, 495-497 (2005) p.711-718

2004

Dewobroto N., Bozzolo N., Grosdidier T., Wagner F., "Texture and microstructure evolution during recrystallization of cold-rolled titanium", Ti-2003 Science and Technology, eds G. Lütjering and J. Albrecht (Wiley-vch), II (2004) p.1211-1218

Dewobroto N., Bozzolo N., Barberis P., Wagner F., "Experimental investigations of recrystallization texture development in Zirconium (Zr702)", Materials Science Forum, 467-470 (2004) p.453-458

Bozzolo N., Dewobroto N., Grosdidier T., Barberis P., Wagner F., "Grain growth texture evolution in Zirconium (Zr702) and Titanium (T40)", Materials Science Forum, 467-470 (2004) p.441-446

2002

Bozzolo N., Wagner F., Dewobroto N., Grosdidier T., "Recrystallization textures in some hexagonal alloys", Materials Science Forum, 408-412 (2002) p.901-906

Wagner F., Bozzolo N., Dewobroto N., Gey N., "Some remarks about the processing of automatic EBSD orientation measurements in view of texture determination", Materials Science Forum, 408-412 (2002) p.143-148